John Deere tractors are the most popular tractors out there, and they have some unique features that you won’t see with other tractors.
Our blog is a great resource for information on how to keep your tractor running smoothly.
How to Clean Carburetors in John Deere D130 Tractors.

Carburetors on john Deer tractors
John Deere tractors have been manufactured since 1927 and still offer the best quality equipment today. The tractors are built with safety as their number one priority. John Deere has worked hard to build the reputation of its products over the years.
what tools should I use for carburetor cleaning
Many farmers and agricultural equipment mechanics swear by a simple cotton swab or a toothbrush. The problem with this is that you might be using the wrong tool for the job.
When cleaning your carburetor, you need a tool that will reach all those hard-to-access places and a method that’s simple enough to be effective.
Here are three of the best tools to clean your carburetor:
• Duct tape – One of the best ways to clean your carburetor is with duct tape.
Simply wrap the duct tape around the back side of the carburetor, pull it up tight, and gently scrub the carburetor with the tape in place.
You’ll probably find that you need a few pieces of tape to get the job done,
so make sure you don’t tear the carburetor casing.
• A toothbrush – If you’re looking to keep things clean, but you’re a little gun shy about taking a chance on ruining your carburetor, then a toothbrush may be your best bet.
Use the toothbrush to reach around the sides of the carburetor to clean it.
• Carpet shampoo – If you don’t have access to a toothbrush, but still want to be extra careful, try using a carpet shampoo.
Spray a little carpet shampoo on your hand and rub it into the carburetor.
This is going to get a bit messy, but you should be able to clean your carburetor effectively.
Common problems with Tractor carburetors
You may not realize it, but your tractor’s carburetor could be preventing it from running at peak performance. Tractor carburetor problems can be very specific or very vague and hard to diagnose. It is easy to make the mistake of thinking that the problems lie. elsewhere on the vehicle, such as the engine or transmission, rather than the carburetor.
For example, the problem could be a broken fuel line, which would cause an intermittent problem.
In that case, you might assume that the fuel tank itself is damaged.
In fact, the fuel tank is in good condition and there is no fuel leak.
On the other hand, the problem could be due to a vacuum leak, which would cause the engine to run rough.
In that case, you would likely blame the air filter or filter housing, or even a loose belt.
It is true that tractor carburetor problems can happen for any number of reasons,
but if you’re having any carburetor problems at all, then you should check the carburetor first.
Here are some things to check on your tractor to find out if your carburetor is working correctly.
How to clean carburetors in john Deer D130 Tractors
This video covers the basics of cleaning the carbs on a John Deere D130 tractor.
Step 1 – Remove air filter, oil filter, fuel filter and then remove the air cleaner housing.
Step 2 – Clean carburetor, jets and air filter with compressed air and a carburetor brush.
Step 3 – Clean jets and air filter with compressed air and a carburetor jet cleaner.
Step 4 – Clean air filter with a foam nozzle.
Step 5 – Clean fuel system with a foam nozzle.
Step 6 – Clean the intake and exhaust ports with compressed air and a carburetor vacuum cleaner.
Step 7 – Clean air filter and replace air filter.
Step 8 – Clean and lubricate the throttle linkage.
Step 9 – Clean and lubricate the valve spring retainer.
Step 10 – Lubricate the valves with fuel.
Step 11 – Test the engine, and if it passes, replace fuel line and tighten.
Step 12 – If the engine fails to pass the test, then tighten all bolts and replace the oil filter.
Cleaning with Windex®
For this project, we’ll be cleaning carburetors on a John Deere D130 Tractor, using Windex® as the cleaning solution.
It may seem like a strange choice, but many tractor owners rely on Windex® to clean their carburetors.
Windex® is a multi-purpose cleaner and disinfectant that works as a safe replacement for hazardous cleaners.
It has been available for over 75 years and is used by millions of people every day.
A recent study showed that Windex® was among the top 10 household products used by adults.
So we decided to see how much cleaning power Windex® has compared to other common household cleaners.
Cleaning with Acetone
Acetone has a low flash point, meaning it evaporates at a fairly rapid rate and is therefore ideal for cleaning out carburetors,
fuel filters, and other parts where oil will quickly coat the surfaces and clog up the mechanism.
Acetone is also effective at removing grease, as it works to break down the lubricant so that it can be rinsed away.
To use acetone as a cleaning agent, you’ll want to first prepare your equipment. While the acetone itself is very safe,
it’s best to do some preliminary research to ensure that you’re using the right dilution ratio and cleaning methods.
The recommended dilution ratio is 10:1, or 1 ounce of acetone to 10 gallons of water.
Acetone will evaporate relatively rapidly, which is good for cleaning; however,
it’s important to note that it will also evaporate into the atmosphere.
This means that you’ll need to either keep it in an enclosed area or have ventilation.
Once you’ve prepared the equipment, it’s time to clean. Use acetone to rinse out the carburetor, filter, and fuel lines.
Once the acetone is removed, you can use a rag and some warm water to remove any remaining debris or Residue.
Cleaning with WD-40®
In the past, the only way to clean a carburetor would have been to disassemble the whole thing, soak it in soap and water, clean it by hand and then reassemble it. Now there’s an easier way: WD-40®.
WD-40® is a multi-purpose product originally developed as a motor oil additive.
After years of research, the product was reformulated to be even more effective at cleaning engines.
The original formulation was specifically developed to coat carburetor surfaces, helping to reduce heat buildup, and prolong engine life.
Now, the same formula is able to be used to remove dirt, grease and grime from almost any surface.
It can even be used to treat the inside of your vehicle’s engine, improving air flow and extending the life of your components.
it can even be used to clean the paint of your vehicle, especially if it’s a rusty job.
It’s important to note that WD-40® is petroleum based, so it shouldn’t be sprayed directly on certain components.
Always follow directions on the product’s label, and always follow proper safety precautions.
Frequently asked questions
What is the 1990 jeep wrangler carburetor Diagram
The 1990 jeep wrangler carburetor diagram is the main part of the jeep wrangler. This information includes the parts diagram for the jeep wrangler and what is the 1990 jeep wrangler carburetor diagram, as well as the parts diagram for the jeep wrangler parts.
How to Troubleshoot mercruiser Carburetors
merCruiser engines are designed to be very reliable and easy to work on. We have a great collection of tips and tricks that will allow you to troubleshoot your carburetors easily.
Final remarks
Carburetors are the heart of a tractor and are crucial to keeping it running. If they aren’t working properly, the entire machine could malfunction. Luckily, there’s an easy way to clean them. This article shows how to clean carburetors in tractors with a John Deere D130.